CN / EN
banner图
Master The Core Technology Control The Use Of Light

Electronic components

PCB solder residue height measurement

Date:2020-06-05 Source:Samsun Technology

In the PCB rework process, measurements need to be made on the solder residue. Through the spectral confocal sensor, the height of the solder at the PCB rework position is measured and, through tolerance control, it is possible to determine in real time whether the rework requirements have been met. It is also possible to measure the warpage and flatness of the PCB in real time.

PCB board real time 3D morphology effect

PCB solder residue height measurement_samsuncn.com

Cross-sectional profile analysis

PCB solder residue height measurement_samsuncn.com

Height numerical analysis



Returns List